Nippers(Diagonal Cutting Pliers/Slant Edge Cutting Nippers/Thin Edge Cutting Pliers etc.)
Hot Nippers
HNT-25 Transformer
| Model | Cord length |
|---|---|
| HNT-25 Discontinued | 1.2m |
| Model | Correspondence product |
|---|---|
| NW-1 | HN-394 |
| NW-1.5 | HN-396, HN-397, HN-398, HN-394(L) |
| NW-2 | HN-395 |
HN394 Hot Nippers
Discontinued
*Only stock
Because the tip of the blade has thinned, it is suitable for cutting such as narrow parts and small articles.
| Model | Length | Weight （g） |
Maximum temperature in cutting portion |
Cutting Capacitty |
|---|---|---|---|---|
| HN394 | 155mm | 250 | 170°C (Outside temperature20°C) |
Hard resin ~4mmφ |
*Application transformer : ＨＮＴ-25 *Spare Heater:No.ＮＷ-1
HN394(L) Hot Nippers
Discontinued
*Only stock
Because the tip of the blade has thinned, it is suitable for cutting such as narrow parts and small articles.
It is a long type of HN-394.
| Model | Length | Weight （g） |
Maximum temperature in cutting portion |
Cutting Capacitty |
|---|---|---|---|---|
| HN394(L) | 190mm | 300 | 170°C (Outside temperature20°C) |
Hard resin ~4mmφ |
*Application transformer : ＨＮＴ-25 *Spare Heater:No.ＮＷ-1.5
HN395 Hot Nippers
Discontinued
*Only stock
Because the head is growing, it is possible to cut it easily even by the size that thermal capacity is large and is fat.
| Model | Length | Weight （g） |
Maximum temperature in cutting portion |
Cutting Capacitty |
|---|---|---|---|---|
| HN395 | 190mm | 400 | 170°C (Outside temperature20°C) |
Hard resin ~4mmφ |
*Application transformer : ＨＮＴ-25 *Spare Heater:No.ＮＷ-2
HN396 Hot Nippers
Discontinued
*Only stock
The tip of the blade to be thin, and the cutting portion is going side by side with the main body. It is suitable for cutting such as narrow parts and small articles.
| Model | Length | Weight （g） |
Maximum temperature in cutting portion |
Cutting Capacitty |
|---|---|---|---|---|
| HN396 | 160mm | 300 | 170°C (Outside temperature20°C) |
Hard resin ~4mmφ |
*Application transformer : ＨＮＴ-25 *Spare Heater:No.ＮＷ-1.5
HN397 Hot Nippers
Discontinued
*Only stock
Because the tip of the blade is thin, and the cutting edge length is long, it is suitable for cutting of the gate where width is wide.
| Model | Length | Weight （g） |
Maximum temperature in cutting portion |
Cutting Capacitty |
|---|---|---|---|---|
| HN397 | 165mm | 300 | 170°C (Outside temperature20°C) |
Hard resin ~4mmφ |
*Application transformer : ＨＮＴ-25 *Spare Heater:No.ＮＷ-1.5
HN398 Hot Nippers
Discontinued
*Only stock
It is suitable for cutting a deep part in end cutting type.
| Model | Length | Weight （g） |
Maximum temperature in cutting portion |
Cutting Capacitty |
|---|---|---|---|---|
| HN398 | 150mm | 290 | 170°C (Outside temperature20°C) |
Hard resin ~4mmφ |
*Application transformer : ＨＮＴ-25 *Spare Heater:No.ＮＷ-1.5