NTT Recommendation Pliers / Cuttring pliers
NTT Recommendation Pliers / Cuttring pliers
NTT Side Cutting Pliers
Pincers of old NTT standard.
It is suitable for cutting the iron wire and the copper wire.
| Model | Size (mm)(in) |
Dimensions | Cutting Capacitty | Weight （g） |
Packing Unit | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| A (mm) |
B (mm) |
C (mm) |
D (mm) |
blade width (mm) |
Iron Wire | Copper Wire | ||||
| B-5 | 125 （5"） | 125 | 42 | 19 | 11 | 11 | 1.6φ | 3.0φ | 110 | 5 |
| B-6 | 150 （6"） | 160 | 43 | 23 | 12.5 | 14 | 2.2φ | 3.0φ | 185 | 5 |
| B-7 | 175 （7"） | 185 | 45 | 24 | 12.5 | 16 | 3.0φ | 3.5φ | 250 | 5 |
| B-8 | 200 （8"） | 210 | 46 | 27 | 12.5 | 18 | 3.4φ | 4.0φ | 340 | 5 |
NTT Slant Edge Cutting Nippers
In nippers used for the maintenance of the telecommunication facilities etc. ,
it is suitable for cutting the copper wire and the cable.
BN-4B, BN5, and BN6 are softcover applying.
| Model | Size (mm)(in) |
Dimensions | Cutting Capacitty | Weight （g） |
Packing Unit | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| A (mm) |
B (mm) |
C (mm) |
D (mm) |
angle (°) |
blade width (mm) |
Iron Wire | Copper Wire | ||||
| BN-4 | 110 （4"） | 110 | 43 | 13 | 9 | 40 | 18 | 1.0φ | 1.2φ | 70 | 5 |
| BN-4B | 110 （4"） | 110 | 43 | 13 | 9 | 40 | 18 | 1.0φ | 1.2φ | 70 | 5 |
| BN-5 | 125 （5"） | 130 | 48 | 14 | 10 | 38 | 23 | 1.2φ | 2.0φ | 90 | 5 |
| BN-6 | 150 （6"） | 155 | 50 | 15 | 11 | 40 | 25 | 1.2φ | 2.6φ | 135 | 5 |
A03 皮むきニッパ
Because the point is thin, it is suitable for cutting an outdoor line and the indoor line best to work in tight quarters.
With stripping hole(0.8mm,1.0mm)
| Model | Size （mm） |
Weight （g） |
Packing Unit |
|---|---|---|---|
| A03 | 125 | 90 | 10 |
A25-S (No.S5 H-side cutting plier)
It is a commodity that did "An excellent ceramic coating in non-electroconductive" to past nippers.
A cutting portion alone is not coated.
It is suitable for the installation work, the removal work, and the wiring work that danger of short-circuit is forecast in the terminal board jumper line.
#Ceramic coating
| Model | Size （mm） |
Weight （g） |
Packing Unit |
|---|---|---|---|
| A25-S | 125 | 90 | 10 |
A25-1S (No.S5 side cutting plier)
It is a commodity that did "An excellent ceramic coating in non-electroconductive" to past nippers.
A cutting portion alone is not coated.
It is suitable for the installation work, the removal work, and the wiring work that danger of short-circuit is forecast in the terminal board jumper line.
#Ceramic coating
| Model | Size （mm） |
Weight （g） |
Packing Unit |
|---|---|---|---|
| A25-1S | 130 | 110 | 10 |
CN-4 side cutting plier with ceramic blade
The cutting portion of the No.4 side cutting plier is made a ceramic chip blade.
#With ceramic chip blade.
| Model | Size (mm)(in) |
Cutting Capacitty | Weight （g） |
Packing Unit |
|---|---|---|---|---|
| Copper Wire | ||||
| CN-4 | 110（4"） | 1.0φ | 70 | 5 |
SC-5H side cutting plier with ceramic blade
The cutting portion of the No.5 H side cutting plier is made a ceramic chip blade.
#With ceramic chip blade.
| Model | Size (mm)(in) |
Cutting Capacitty | Weight （g） |
Packing Unit |
|---|---|---|---|---|
| Copper Wire | ||||
| SC-5H | 125（5"） | 1.2φ | 90 | 6 |
A15・A16 丸ペンチ
It is whole pincers used for the maintenance of the telecommunication facilities etc. , and the wire rod is rounded, and it is suitable for the bend processing.
| Model | Size （mm） |
Weight （g） |
Packing Unit |
|---|---|---|---|
| A15 | 125 | 90 | 10 |
| A16 | 150 | 110 | 10 |
A26 6号B丸ペンチ
It is a commodity that finishes up the plating of No.6 whole pincers.
| Model | Size （mm） |
Weight （g） |
Packing Unit |
|---|---|---|---|
| A26 | 150 | 90 | 10 |
A26-S No.S6 B Round nose plier
It is a commodity that did coats the ceramic to No.S6B Round nose plier.
It is suitable for the installation work, the removal work, and the wiring work that danger of short-circuit is forecast in the terminal board jumper line.
#Ceramic coating
| Model | Size (mm) |
Weight （g） |
Packing Unit |
|---|---|---|---|
| A26-S | 150 | 90 | 10 |
A26-1S No.S6 Round nose plier (Bent type)
It bends A26-S ahead.
It is suitable for the installation work, the removal work, and the wiring work that danger of short-circuit is forecast in the terminal board jumper line.
#Ceramic coating
| Model | Size (mm) |
Weight （g） |
Packing Unit |
|---|---|---|---|
| A26-1S | 150 | 90 | 10 |
A86-W Telephone plier (With blade)
It installs the zirconia ceramics in the tip. The radio pincers to have aimed at the short-circuit prevention.
| Model | Size (mm) |
Weight （g） |
Packing Unit |
|---|---|---|---|
| A86-W | 160 | 100 | 5 |
A86-BW Telephone plier (Bent type, Non blade)
It installs the zirconia ceramics in the tip. The radio pincers to have aimed at the short-circuit prevention.
| Model | Size (mm) |
Weight （g） |
Packing Unit |
|---|---|---|---|
| A86-BW | 150 | 100 | 5 |
A87-Z Ceramic side cutting plier
It installs the zirconia ceramics in the tip. The radio pincers to have aimed at the short-circuit prevention.
| Model | Shape | Ceramic part | Packing Unit |
|---|---|---|---|
| A87-Z | Straight | Bonding | 5 |
A87-ZB Ceramic side cutting plier (Bent type)
It installs the zirconia ceramics in the tip. The radio pincers to have aimed at the short-circuit prevention.
| Model | 形状 | Ceramic part | Packing Unit |
|---|---|---|---|
| A87-ZB | Bent | Bonding | 5 |